Design point was on strongnes and adjustment posibilities of the tool.
Can be fixed on a table from 15mm up to 45mm. Set height, turn it around, setup angle.
How to print:
Print it with a PETG z=0,3 20% infill (String and parts of Srews where are threads should be 100% infill, please follow reading with how to print)
100%infill settings (add modifiers cylinder with 100%infill)
Support settings. Paint on supports: Organic
How to build:
Suggest to add machine oil on the threads.
W
The author marked this model as their own original creation.