Gridfinity Square 70x100 holder

To minimize the footprint of tools in the Gridfinity System I built a square holder for a 100x70mm Square with foot. I use this one from banggood. (Non affiliated link!) I've added a chamfer at the bottom, so it is easy to get the square out. 

There are 2 versions available, one without magnets and one with. 

The square has a thickness of 5mm and the foot of 20mm. The angles are 20mm wide, the foot is 25mm. 

Printed in PLA - 60g

1:27h on a X1 Carbon