Addons for desktop Turbine

here are some addons for the DC775 Turbine from https://www.printables.com/de/@PINGUIN

1st 

i added a screen for the backsite

you can attach a charcoal filter with that and use the turbine as a fume extractor

or

you can spin the turbine reverse an use that screen as a dust filter

Part A

For the Screen there are two options:

1. empty screen, to clamp a filter or something

2. a closed one, with that you can print the filter. To do this use the height modifier and make 1mm only infill like 25% honeycomb, that setting was used on the picture

Part B

i made a Base that can be attached to the Fan Housing
one hole at the Backsite for a DC Plug
and a mount for PWM like this one
https://amzn.eu/d/6Mu9k9z

on the botton side are 2 holes for heat-inserts (not shown on the pictures)