Vase Mode Playmat Tube Remix: Spiral

I really liked the vase mode playmat tubes created by Tekcor17, but I found printing them with an 0.4mm nozzle was too weak for my liking. The original models didn't fit together when I printed them with a larger nozzle, so I rebuilt them in Fusion360 to be printed with different sized nozzles.

This is my version of Tekor17's Spiral design. I also recreated their Spots and Stripes designs, as well as my own designs Corrugated and Zig Zag. These models are designed to printed in vase mode using an 0.4mm, 0.6mm, 0.8mm, or 1.0mm nozzle. All designs can be mixed and matched with others printed with the same nozzle size.

I have included test files of the mating surfaces, so you can tune your settings without having to print the whole model.

All models pictured were printed with an 0.8mm nozzle at 0.32mm layer height on an Ender 3 using tri-color coextrusion PLA.

Update:

I have created a parameterized version of this model here if you want to make this in different sizes. 

Created models for printing with different nozzle sizes