HARDCASE TAB7 BY MBOT3D

• Hardcase TAB7 by MBOT3D

I deliberately made this design, because I have a feeling of wanting to have a compact & simple device in one unit to be able to run my 3d printer machine. Like similar products that have been market out there.
Because I surveyed and considered whether to buy a similar product or make it myself. And finally decided with consideration of lower costs, that's why I made this design.

For the BOM:
1. LCD 7inch Capacitive Touchscreen : https://www.waveshare.com/7inch-hdmi-lcd-h-with-case.htm
2. Bigtreetech BTT Pi v1.2 : https://biqu.equipment/collections/new-arrival/products/bigtreetech-btt-pi-v1-2
3. M3x16mm_90751A114_18-8 Stainless Steel Socket Head Screws @4pcs
4. M3_94459A130_Heat-Set Inserts for Plastic @4pcs.
5. M4_3391A51_Steel Metric Ball-Nose Spring Plunger @2pcs for mounting stand.
6. M4_94459A170_Heat-Set Inserts for Plastic @4pcs.
7. M4_Thumb Screw @2pcs.
8. M2_94180A307_Tapered Heat-Set Inserts for Plastic @5pcs.
9. M2_91294A538_Black-Oxide Alloy Steel Hex Drive Flat Head Screw @5pcs