Flashforge Foto 8.9 Z Axis Spacer for magnetic Build Plate

4mm z-axis spacer for Flashforge Foto 8.9 resin printer

Needed as there wasn't quite enough play when I fitted a magnetic build plate. The two lugs locate into the printer so it says in place with the fitting screw removed.

50% infill used as it's constantly under pressure but not sure if necessary.

Designed in tinkercad.

Print Settings

Printer:

Tronxy P802 MA

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50%