Desktop Organizer

This is re-drawn version of Organizer Desktop Organizer by Byzantium3D with following improvements:

• Neat hexagon pattern
• USB type C slots instead of SD cards
• Slightly deeper compartments

Printing Instructions

1. I recommend printing the top and bottom with different colors
2. Printing requires minimal support, especially only the upper part needs support from the bed to the edge where the bottom plate attaches.
3. Two parts can be superglued together
4. Printing takes a long time if the default infill% is used, try something like 10%

Note: The gap between the parts in the pictures should now be fixed in the model