Han Solo Carbonite (Filament Painting)

4 Color HueForge model. Han Solo Carbonite filament painting made using Sunlu PLA+ colours.

Print at 0.08mm layer heights, 0.16mm first layer.  100% infill (Rectilinear)

Filaments Used:
Sunlu PLA+ Black Transmission Distance: 0.6
Sunlu PLA+ Grey Transmission Distance: 2
Sunlu PLA+ Silver Transmission Distance: 2
Sunlu PLA+ White Transmission Distance: 6

Swap Instructions:
Black until layer #6 at 0.56mms
Grey until layer #9 at 0.8mms
Silver until layer #11 at 0.96mms
White for the rest

This is a filament blending model, avoid special filaments and stick with the plain ones for the best results.  SUNLU filaments tend to be more transmissive and are a good choice.

Use the exact numbers in your slicer to match up properly.

two different size models are supplied and designed to print with 0.4 nozzle, do not resize the images in the slicer