3D scan Marker Base - Two versions

Marker base for standard global positioning marker stickers used with 3d scanners like Shining3D Einstar - H - HX etc.

3D printed with bottom hole to accept a 10x1.5mm magnet(this version may require supports)

I have also included a version that does not have a bottom hole so would not be used with magnets(this version does not require supports)

Download the .step format if you wish to edit the model.

Takes approx 15min to print each base(depending on print speed), i suggest printing one to test your settings, then proceed to print as many as needed for your projects.

Link to the set of magnets i used- They press into place with some pressure applied, can also be glued in place-
https://www.amazon.com/gp/product/B09WZTSQ9Y/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1