DiA power source for Chaos Stratus guitar pedal

Got an awesome smart pedal from Chaos Audio and wanted to use it outdoors without hassling with other power source options. So made this clip-on power source to keep stuff simple 😊
See the video of it in action:

Print all parts without supports. I use PETG.

Make your own adapter cord between a 9V clip and a 5.5mm barrel plug. The plug holder is designed for a plug with a 10mm diameter body.
Do not tighten the plug yet, adjust its location with the Stratus. When you are satisfied, tighten it firmly. Glue the bottom part to the top with CA or other suitable glue.

If the battery doesn't stay snug, put some tape on the battery or inside the box.

I've added also a STEP file, so you can modify a plug holder to fit your plug. But make sure to keep the plug centre in the same place, as the body of the Stratus pedal is not parallel vertically.

As I give these files for free to modify, I wish, you would not remove my logo from it.