Fuel tank battery compartment for 3DSets Bamboo (Model 13 - Winch Truck)

This model allows using bigger 3S2P custom battery packs made from 18650 cells in the 3DSets Bamboo (Model 13 - Winch Truck), model available on their site: https://3dsets.com/product/model-13-bamboo-4x4-winch-truck/

Side fuel pipes are held in place in the cutouts and don't require gluing.

Spare Wheel Holder is designed for a 115x40mm tires (bigger than suggested by 3DSets)

Only the fuel pipes require enabling standard “on the bed” support in prusa slicer, the fuel tank has got a built in support.

For the cool “seethrough” effect on the flatbed please set the top and bottom solid layers to 0 and enable the parallel lines infill pattern (just as it is done in the original flatbed model from 3DSets).

Required screws:

4x M3x10 for mounting the fuel tank to the bed,

4x M3x6 for mounting the wheel holder to the bed

optional 4x M3 nuts for better visual effect on wheel holder

Flatbed requires printing the original latches included in the original 3dSets model.