Trouser/Jean Extender

Modelled in Fusion360 in just 3 minutes and has lasted many wash cycles and still looks the same as the day I made it.

241

updated June 11, 2023

Description

Simple Trouser/Jeans Button extender for those strange sized clothes from the internet or bulking up for the winter (my favourite line).

Printed in Overture white TPU 2mm with 30% infill.

40mms on direct drive with 1.6mm retraction at 16mms.

NO FAN.

235c nozzle and I use 74c bed on glass.

The author marked this model as their own original creation.