MKS PI Case

Model files

All model files (6 MB)

case parts - FRONT.stl

case parts - FRONT.stl

252 kB  |  June 10, 2023

Slice

Download

case parts - MKSPI_mount.stl

case parts - MKSPI_mount.stl

485 kB  |  June 10, 2023

Slice

Download

case parts - BOTTOM.stl

case parts - BOTTOM.stl

590 kB  |  June 10, 2023

Slice

Download

case parts - ACCESS_COVER.stl

case parts - ACCESS_COVER.stl

413 kB  |  June 10, 2023

Slice

Download

case parts - TOP.stl

case parts - TOP.stl

1 MB  |  June 10, 2023

Slice

Download

MKS Pi case.step

MKS Pi case.step

34 MB  |  March 18, 2024

Slice

Download

Model origin

The author remixed this model.

Raspberry Pi 4 Case

by Squirrelbrain

 

GitHub - makerbase-mks/MKS-PI: As we all know, the Klipper firmware has the advantages of high printing speed, high precision, and the ability to use the web page to control the printer, etc. MKS PI is a high-end microcomputer board designed by makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. In terms of hardware, MKS PI has a powerful 4-core 64-bit SOC onboard, with 1GBytes of DDR3 memory, supports HDMI screen interface and PI-TS35 screen interface, provides Ethernet port, 3-channel USB interfaces (can be connected to a 3D printer main board, USB Wireless network card, USB camera, U disk, USB keyboard and mouse, etc.); In terms of software, Makerbase provides a complete Klipper firmware transplanted based on the Armbian desktop system, and directly supports klipperScreen. Users only need to download the image file provided by Makerbase, burn it to the TF card, without a lot of construction work, use the usb port or serial port to connect your main board, configure the parameters on the webpage, and you can use the Klipper firmware happily!

github.com

Differences of the remix compared to the original

License