Ikea Skadis Pegboard PC Component Mounts

I wanted to learn some basic Fusion360 and 3D printing skills, so I designed these parts for the Ikea Skadis pegboard for mounting PC components.

These were designed specifically for the parts I have: an ITX Motherboard, SFX PSU, 240mm Radiator and a 242mm Founders Edition 30-series GPU. The thread offsets and mounting points are by no means standard across all PC parts, so your mileage may vary. Feel free to resize the mounts to fit your components as needed!

Amazon Link for 6-32 Threaded Inserts
Amazon Link for 6-32 Screws
These are likely available on AliExpress or from wholesale suppliers for much cheaper.
(I'm also annoyed with the imperial parts... but the radiator used 6-32 pre-drilled holes, so I'd rather go with one thread size than use metric and have two thread sizes.)

If you're budgeting a PC build around this, make sure you account for PSU cable extensions (I used 60cm 24-pin and CPU 8-pin, and 30cm GPU 8-pin) and PCI-e Extensions (I used 2x 30cm and 1x 20cm... This could likely be done more efficiently).

PCI-E x16 Gen3 Extension I Used
PSU Extensions I Used

Tips appreciated!!

Currently looking for work in Product Design, Content Marketing, Graphic Design <3