Eureka Mignon Notte to Flair Classic portafilter basket adapter

This is an adapter for the Eureka Mignon Notte coffee grinder to hold the Flair Classic 48mm "Bottomless 2-in-1 Portafilter". It works best with the "filling funnel - standard" attached to the basket. Note that you need to re-use the screw that attaches the stock fork to the body, or find a similar replacement.

My printer (Prusa Mini+) wasn't calibrated beforehand so you may need to scale the model slightly to get the right fit. The most important dimensions are the mating point between the fork and the grinder, and ensuring your portafilter basket fits nicely. You may want to do a test print slicing off just the back portion of it where it meets the grinder to make sure it fits snugly there first.

For supports, I set it to: "supports on build plate only", and "Style: Snug"

Approx. 25.59g / 4h41m

Total print size: 75.98mm x 46.94mm x 99.43mm