Door Threshold Ramp - Parametric

This is a parametric door threshold ramp to help robot vacuum cleaners to get over door lips.

If your printer can produce good bridges then I recommend printing it in the finished orientation to create a surface for the wheels of the robot to grab on to. If you have a textured plate then that will probably work as well.

The f3d file is parametric for the following parameters:

• Width
• Depth
• Height
• AmountDoveTail
• AmountLegs
• ShellWidth

There will always be a leg in the middle and reducing the AmountLegs parameter will not remove it.


 

You can tip me on Ko-Fi if you want to support my work.

Change log: 

2023-06-17 - Changed the extrusion setting so there isn't any dovetails legs that needs to be cut because they are longer than the height of the ramp.