Spikey Gothic Succulent Planter

This is a very spikey succulent planter pot, perfect for your spikey plants!  It is oval and covered in spikes as it slightly gets wider towards the top.  The blue one in the pictures is “full size” and the yellow is 75% scale.

In order for it to print successfully the layer height should be no more than 0.2mm and the extrusion width needs to be at least 0.8mm (or more!).  Use vasemode and print it SLOW with just enough cooling to keep things from sagging or curling.

Printing Instructions

Rafts: No
Supports: No
Layer Height: 0.2mm
Perimeters: 1
External Perimeter width: >0.8mm
Infill: 0%
VASEMODE!
Filament brand: Any
Filament color: Any
Filament material: Any

I HIGHLY recommend that you print this with wide (>0.8mm) external perimeters at a standard 0.2mm layer height.  Wide layers will help ensure that does not have holes or gaps!