Simple Super P.I.N.D.A Adjusting Tool

I have recognized that the adjusting with a credit card, as described here https://help.prusa3d.com/en/guide/how-to-adjust-the-height-of-the-m-i-n-d-a-sensor-mini_154547, is not good for Super P.I.N.D.A because the Z-Live will be something like -1.600 with a PEI steel sheet. This means that the range of -2.000 will not be great enough for the Textured Steel Sheet.

Print this simple tool and use it instead of the credit card and you will reduce your Z-Live to something like -0.500.

After you have finished adjusting your Super P.I.N.D.A you can use this Tool as a simple LCD Cover for your Mini 😉

Print instructions

I just printed it with 0.2mm Quality, Orange Prusament PLA and no need to change the PrusaSlicer Standard settings.

Supports: NO

Brim: NO

Happy printing ;-)

Buy me a coffee

If you appreciate my work, you can buy me a coffee. Thankful!