Slabiimov Shroud

Print with 10 or 15% infill or else it will be quite heavy. 

The core needs to be printed with the tip facing up and with supports to build plate only.

Hardware:

10x M3 12mm screws

Assembly:

1. Remove support material from the Core.
2. Slide the Core over the modified Muzzle A piece.
3. Make sure the holes align and Screw in 4 M3 screws on either side.
4. Slide on the Inserts with the order provided.
5. Slide on the Tip and use the last 2 screws to secure it in place.

Enjoy!

Shroud Design is my own, modified Sillybutt's part to adapt it infront of the barrel