Alfa Romeo Stelvio/Giulia Radar Shield

Alfa Romeo Stelvio/Giulia 2021 Radar Shield
7
135
0
1538
updated June 8, 2023

Description

PDF

Radar Shield per eliminare il problema dell'accumulo di acqua, sporco e neve che disattiva il radar anti collisione in caso di forte pioggia o nevicata. 

Testato con tutte le impostazioni di sensibilità non influisce sul corretto funzionamento dell'anti collisione

Stampato in BambuLab PLA-CF, PETG opaco, meglio in ABS o NYLON … con struttura di rinforzo, si incastra alla copertura originale del radar senza dover smontare nulla.

Per installarlo basta spingere la parte superiore fino a sentire un click, e poi spingere la parte inferiore a destra, al centro , e a sinistra, ancora fino al click.

Può essere rimosso forzando dai lati corti, la tenuta è infatti garantita dal lato lungo superiore e dal lato lungo inferiore.

Montare con le riserve nella parte inferiore.

Layer 0,20

Infill 30%

Loop pareti 2

Layer guscio inferiore 4

-----------------------------------------------------------------------

Radar Shield to eliminate the problem of the accumulation of water, dirt and snow that disables the collision radar in case of heavy rain or snowfall.

Tested with all sensitivity settings does not affect the proper functioning of the anti collision system.

Printed in BambuLab PLA-CF, PETG opaque, better in ABS or NYLON … with reinforcing structure, it hangs to the original radar cover without having to disassemble anything.

To install it just push the top until you hear the click, and then push the bottom from the right, from the center, and from the left, again until you hear the click.

It can be removed by forcing from the short sides, the tightness is in fact guaranteed by the upper long side and the lower long side.

Assemble with the reserves at the bottom.

Layer 0.20

Infill 30%

Loop walls 2

Bottom shell layer 4

 

Printed with BambuLab X1C on Cool plate

Tags



Model origin

The author marked this model as their own original creation.

License