Bottom panel for the V0.1 Trident Skirt remix
6
9
0
332
updated June 8, 2023

Description

PDF

Bottom panel for the V0.1 mod Trident skirt remix of damian-gdes
 

Printed in PLA. If printed in ABS maybe to print upscaled 100.5%

BOM:
4 M3x20 BHCS (if heat inserts are used) or 3x M3x20 plus 1x M3x45 -> to replace the srews for the feet
4 M3 5x4 heat inserts (Voron specs)

Preparation (optional):
- enlarge the holes for the feet with a 4.5mm drill
- melt in heat inserts

Mounting the PTFE tube:
Pull the tube from the holder of the corner feet and insert into the hole of the back wall

Thanks to damian-gdes who made my V0.1 nicer
with his mod: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/golas/v0-trident-skirt-mix
Thanks to Steve, Nero 3D and Sanity for all their help and patience and all the others who helped
 

Model origin

The author marked this model as their own original creation.

License