None of the parts should need supports.
You can use nails or pushpins to mount the tracker.
Time Labels
- color change after 1 mm
- At least 4 top layers
- Infill 10%
- Glue these to the wheel
- If feeding 3x a day, print 2 of each
- If only feeding morning and evening, print 3 of each of those
Face plate
- color change after 2 mm
- At least 4 top layers
- Infill 10%
- may need to be glued to the back, or use double-sided tape to be able to remove it if needed.
Back
- I used 2 perimeters and lightning infill to minimize filament usage.
Rod
- 3+ perimeters
- 20%+ infill
- Brim
- Can add supports if you want
- print upright
- This can be glued in or screwed in with M5 screws
Tags
The author marked this model as their own original creation.