Nerf BlowGun Modular

Just a simple modular Nerf Blowgun for N-strike Elite Foam Darts.

Print:

1x Barrel Cap, 22mm*22mm*50mm, Less than 10g, Depending on how you print it you don't need supports.

1x End Piece, 50mm*50mm*65mm, Less than 10g, Don't need supports

?x Main Body Piece, Depends how long you want it. (I went with 2), 22mm*22mm*200mm, 32g, Needs supports

*For most pieces, I suggest a brim since the pieces are tall and slim.

**Depending on your printer, the treads might be too tight, For mine its prefect.

Printed on a Bambu Labs X1 Carbon with Polymaker White PLA

0.20mm Resolution

15% Infill

Support For the Main body piece and maybe the Barrel Cap if needed.