Hinge 4mm for acrylic doors

I designed these door hinges for my 3D-printer box. It's for 4mm thick acrylic doors. You dont need anything, beside two metal screws to mount these anywhere.

Please look excactly, which door hinge you need, before printing. There are two versions which only varies in the thread. The head of the screw should be outside.

LeftUp_RightLow = left side upper corner and right side lower corner

LeftLow_RightUp = left side lower corner and right side upper corner

Do not tighten the printed screws too much!

Print Settings

Printer Brand:

ELEGOO

Printer:

ELEGOO NEPTUNE 3 Pro

Rafts:

Yes

Supports:

Yes

Resolution:

Normal/High Quality

Infill:

15

Filament: Geeetech PETG random