A sign stand and two different sign holders. I use these at art shows. Lightweight, easy to transport and set up. The stand piece works both ways so no need for a ‘left’ and ‘right’ version. Just print two per sign and you're good. I use double sided tape to hold the signage to the holder, but any number of things would work as well.
Sign Stand
80mm Legs
Groove is 4mm wide, 3mm deep.
6mm Total thickness
Large Sign Plate
Outside: 152mm x 101mm
Inside: 138mm x 87mm
Small Sign Plate
Outside: 101mm x 62mm
Inside: 87mm x 48mm
The author marked this model as their own original creation.