Foxeer Micro Cam FPV Plane mount

Designed this FPV mount for use on my Delta Wing. Created a simple mount that would point straight ahead, or slightly downwards past the horizon, added 2 bolts for screwing it down (or gluing).

Printed in orange PLA+ 0.2mm w 50% infill.

Print instructions

Category: R/C Vehicles Summary

Designed this FPV mount for use on my Delta Wing. Created a simple mount that would point straight ahead, or slightly downwards past the horizon, added 2 bolts for screwing it down (or gluing).

Printed in orange PLA+ 0.2mm w 50% infill.

Print Settings

Rafts & Supports: NO
Layer Height: 0.2 -> 0.3
Infill: 20-50%