Wall-mounted Medal/Lanyard Storage
This is a simple way to store any medals or lanyards on your wall.
14
72
0
378
updated
August 6, 2023
Description
PDF- Printing
- Printed it at 0.3 layer Height
- Used 20% cubic infill
- Material-PLA
- Assembly
- Find 3 drywall screws
- you may want drywall anchors depending on how much weight your hang off it.
- screw in either the far left or far right screw in the desired install location and then using a level line up the other side. Then finish by installing the finial screw in the center
- Find 3 drywall screws
Tags
Model origin
The author marked this model as their own original creation.