Bambu Lab X1C Alveo3D HEPA filter with extra magnets - AMS compatible

Update 05-Oct-2023
added a version with 6x3mm magnets



Matt Rayner created a great remix of a HEPA filter housing for the Bambu Lab X1. It houses an Alveo3D “P3D” filter which combines a HEPA filter and an activated carbon filter, so it filters both nanoparticles and VOCs.

The housing uses several 8x3mm magnets. Unfortunately, it does not fit if the AMS hub is installed on the back of the printer. I changed the housing to make it fit.

Once the Alveo3D filter is installed, you can/should remove the Bambu Lab activated carbon filter. It is unnecessary and significantly worsens airflow to have two carbon filters installed.
 

The housing uses several 8x3mm magnets. Unfortunately, it does not fit if the AMS hub is installed on the back of the printer. I changed the housing to make it fit.

I also added a version with 6x3 mm magnets.