RMU-Mk3 Brackets

Upper and Lower brackets to attach a RMU-Mk3 to Prusa MK3, so that together they can be installed and removed from an Original Prusa Enclosure as one assembly for a neater installation.

RMU-Mk3 https://filamentbuffer.co.uk/

Mount Lower Bracket to frame using M3 3030 Nuts and 2 off M3x15 screws. Attach the Upper and Lower Brackets to RMU-Mk3 body using 4 off M3x20 screws and nuts.

Brackets were printed using 0.2mm_PETG. 20% infill.

Upper bracket slots on to the printer frame support just through friction alone but it can be made more secure by replacing the existing M4x10 frame support screw with a M4x20 and securing the bracket down on to the back of the frame with a M4 nut if required.

The frame support is required when the PSU is relocated to back of the enclosure.