iPhone 8,7,and 6 Tripod

This is a simple tripod for your iPhone 8,7,6 or any other phone of this size. I had my Phone in a slim case which is crucial to help it work. The case is an esgo which totals the depth of the phone to approximately 10 mm and width of 72 mm. This can be used to take still pictures or an upright stand. The internal dimensions of the slot are 11.15 mm in depth and 74 mm in width. Height should not be a problem with this unless it is above 150 mm. Feel free to make edits to this and post the remix for a different phone.

Print instructions

Category: Tools Summary

This is a simple tripod for your iPhone 8,7,6 or any other phone of this size. I had my Phone in a slim case which is crucial to help it work. The case is an esgo which totals the depth of the phone to approximately 10 mm and width of 72 mm. This can be used to take still pictures or an upright stand. The internal dimensions of the slot are 11.15 mm in depth and 74 mm in width. Height should not be a problem with this unless it is above 150 mm. Feel free to make edits to this and post the remix for a different phone.

Print Settings

Printer:

Prusa Mini

Rafts:

No

No

Resolution:

0.1

5%

Filament: Sunlu PLA Red

Notes:

More infill will only help you but I would say 5% is a minimum for sturdiness. Also, when printing flip upside down to print without supports.

Thank You

Please like if it was a success and please comment with suggestions ideas or concerns. Follow me for a follow back! Also, makes are greatly appreciated to know you are having success. If you have any ideas of future models please send me a message via Thingeverse or email me @[email protected]

All of your support is greatly appreciated in this journey!

P.S. The next project is printing in the background of the pictures ;)