CFD-optimized Fan + Sherpa mini for Prusa Mini+

WARNING! Installing direct drive in such way reduce your maximum Z height to 140mm

I decided to improve the cooling of my Mini+ with a direct drive. But in order not to install additional printed parts, I decided to rework the model with seats for Sherpa Mini. 

As users note in the comments, you need to install a different table mount so that the cooling does not touch the signet. the part that covers the contacts. Low Profile Heatbed Cover
I faced such a problem, because I installed a copper heartbreak from Mellow, and it is 1-2mm higher than the original