Camera Bracket

*WORK IN  PROGRESS*

A mount to take timelapse video while printing, it attaches to the bed as a clamp and the opening is 4.5mm (my bed is 5mm thick).
Printed in PLA but it is recommended to use PETG to avoid trouble with the heat of the bed.
 

V2.1 - requires 4x M4 15mm long bolts and 4x Nuts.
V2.1 - I used the cut feature at 8mm (for a thinner bed use the cut again to shorten the opening) in order to separate the two pieces and it worked great.
 

V3 is a print in place w/ plastic latches.