Stacking Tray Set - fully customizable (incl. Fusion360-file)

A set of fully customizable stacking trays with lid reaching from 1x1 to 5x5 chambers
18
110
2
446
updated August 20, 2023

Description

PDF
Deutsch weiter unten

 

2023-08-20

New Sets added.

 

A set of fully customisable stacking trays with lids, ranging from 1x1 to 5x5 chambers.

All parameters can be customised with the supplied F360 file:

  • Width,
  • depth,
  • useful height,
  • rounding,
  • wall thickness, 
  • bar height (should be less than or equal to useful height), 
  • bar width
  • and many others

The 5x5-chamber model is also included for magnets. Adjustable are magnet height, diameter and layer thickness above the magnet. The prepared models are for magnets 8mm diameter x 3mm height.

The parameter names are in German, it's just my mother tongue ;-)

The sets correspond to width x depth x useful height.

Questions and suggestions are welcome in the comments.

(translated with DeepL)

_______________________________________________________________________________________________________________

2023-08-20

Neue Sets hinzugefügt.

 

Ein Satz vollständig anpassbarer Stapelschalen mit Deckel, der von 1x1 bis 5x5 Kammern reicht

Mit der mitgelieferten F360-Datei lassen sich alle Parameter anpassen:

  • Breite, 
  • Tiefe, 
  • Nutzhöhe, 
  • Rundung, 
  • Wandstärke, 
  • Steghöhe (sollte kleinergleich Nutzhöhe sein), 
  • Stegbreite,
  • und viele andere

Das 5x5-Kammern-Modell ist auch für Magnete dabei. Einstellbar sind Magnethöhe, -durchmesser und Schichtdicke über dem Magneten. Die vorbereiteten Modelle sind für Magneten 8mm Durchmesser x 3mm Höhe gedacht.

Die Parameternamen sind in deutscher Sprache, ist halt meine Muttersprache ;-)

Die Sets entsprechen Breite x Tiefe x Nutzhöhe.

Fragen und Anregungen gerne in die Kommentare.

Tags



Model origin

The author marked this model as their own original creation.

License