DS213 Oscilloscope Rugged Box (+ Stand)

I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box.

I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be inserted into the back of it to ensure it only folds out to 90 degrees.

An extra set of probes can be fitted or the stand (see pictures).

To make this you will need 6x m3x20 screws. You can also have 2 optional 5x1mm neodymium magnets if you don't want the stand to rattle when stowed.

As always, I've also included a STEP file for those wishing to make changes.