Workmate folding workbench leg springs – less support remix

I inherited a Workmate with all four leg springs broken. Looking to replace them I found the model by  @noncorporealb_428881 which is precise in dimensions. I took it as a template to make a more printer friendly version that needs less support.

Printed in PETG, 0.4 mm nozzle, 0.25 mm layer height, 2 perimeters, 15 % gyroid infill (50 % with modifier for the not springy part), some organic support.

Assembly

From the original model description:

Use a hammer to knock the pin out to remove the broken springs, then just thread the new springs on and tap the pin back in.