Jaw Covers for 4 inch bench vice by Harbor Freight Central Forge

Snap in jaw covers for the Harbor Freight Central Forge 4" bench vice. Protective your work without the metal jaws marring the surface of plastic or other soft work materials. 

Comes in several variants with either large grooves, a gripping surface, a larger pipe holder, a completely smooth surface, and a lateral and radial pipe roller. The pipe rollers are made to press fit standard 608 roller blade bearings. 

The edge of the opening is lipped so it holds itself on its own pretty well, but also has holes to easily hand press fit 6x3mm cylindrical magnets. You may wish to add a bit of superglue, but I find mine stay put without any glue. You can find them on eBay by searching “6mm x 3mm 1/4"x1/8" N52 Strong Disc Rare Earth Neodymium Magnet” or here: www.ebay.com/itm/142463540887

Printed in regular PLA with a Wall Line Count of 6, Infill Density of 20%, and Infill Line Multiplier of 2. No supports needed on any, except the lateral pipe roller.