Sovol SV01 Pro Pen Mount

A simple mount that allows for a Sovol SV01 Pro to be converted to a pen plotter.

It is bolted to the side of the extruder using the fan cover's M3 bolts. The pen is then attached to the mount using an M3 nut and screw which tightens down on the two arms around the pen.

A weight may be needed to ensure proper contact between the pen and the paper. In the photo above I taped a 12mm nut onto the pen and that was heavy enough to draw at a consistent tone. Ballpoint pens recommended.

Feel free to suggest any improvements.