Slim RJ45 Ethernet Cap / Coupler/ Clip protector

Summary

Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables.

There is one open ended file to customize to your requirements, a cap and two couplers, one with the tabs on the same side, one with them flipped.

The models all feature sacrificial bridging and should print fine without any supports. The Bridge must not droop too much, since there is only 0.6mm of clearance to the locking surfaces. The Bridge has to be removed carefully using a knife or flushcutters for the parts to be usable.