Wand bracket for Riccar Pristine (#STINE.6) vacuum cleaner

This is a replacement "bottom" wand bracket for my Riccar Pristine (model #STINE.6 as visible in the photo), my original having broken.

The design is publicly available on Onshape, and is extensively parameterized. As a “Public Document” created by a "Free Plan User" after August 7, 2018, the applicable copyright license may be found in Onshape's Terms of Use; the language there closely resembles the X11 ("MIT") license.

The model includes a sacrificial bridge intended to allow it to print with the back side (facing towards the vacuum cleaner in the photo) facing towards the bed on FDM machines, with a relatively large support raft; in retrospect I'd put different sacrificial bridges in (for the screw holes and the ‘pocket’ towards the top) and print it with the outside (facing the camera in the photo) towards the bed. Mechanical strength seems adequate with Prusament PETG (clear/natural pictured).