GPU Vertical Mount - SLI

UPDATE

Backplate 9 has been updated to match.

Intro

A vertical GPU mount for SLI. I designed this mount in from scratch, using an old case to get the dimensions for the PCI slots and the alignment of the riser cables. I actually designed this in December 2017. I searched on Thingiverse for something that was already made but there was nothing that met my needs. I designed this to be able to fit into most full tower cases. It needs to have at least 8 slots available in order to fit. GPU's are actually really tall!

The case I have is the Corsair 780T. I had to cut the case where the GPU sits once vertical in order to be able to connect the cables. I didn't realise that there are braces between each slot but it's definitely worth it. It will still work perfectly fine if I ever revert back to normal mounting.

Hardware

I used some fasteners to assemble the mount which you will need to purchase. You don't have to use the exact some ones but I designed it to work with the following:

Machine Screws M4 Countersunk

-- 16mm x 5

-- 12mm x 12

-- 10mm x 2

Flat Washers M4 - Qty 19

Self Locking Nut M4 - Qty 19

Machine Screws M3 Pan head - 16mm - Qty 4

Flat Washer M3 - Qty 4

Self Locking Nut M3 - Qty 4

PCI Riser Cables

Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm: https://www.amazon.com/Thermaltake-Gaming-Black-Extender-AC-053-CN1OTN-C1/dp/B06Y5YNGDJ

Print Settings

Printer Brand:

MakerBot

Printer:

MakerBot Replicator+

Rafts:

Yes

Supports:

Yes

Resolution:

0.2mm

Infill:

20%

Filament: Makerbot PLA Grey