Picoprobe (debug probe) - RP2040-Zero case v2

An enclosure for RP2040-Zero board running Picoprobe firmware
17
128
2
1170
updated June 4, 2023

Description

PDF

A dedicated case for the smallest usable RP2040 board I could find. It has labels for pins used by Picoprobe and a separate hole for each cable to prevent tangling. It screws together with (up to) 4 M3 14mm screws (and nuts). 

The project was designed for Bambu AMS multi-color print but the labels should stay legible if they are not filled with color (recessed only).

It prints nicely with a textured plate and supports on both sides.

In this version, I added mini-clips holding the cables in place to help with putting the thing together.

 

Related links

https://github.com/raspberrypi/picoprobe

https://www.waveshare.com/wiki/RP2040-Zero

https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf

 

Wiring

You can follow the official “Getting started…” guide linked above. The needed GP2, GP3, GP4, GP5 are marked as 2,3,4,5 on the RP2040-Zero board.

 

Tags



Model origin

The author marked this model as their own original creation.

License