This is my second iteration of a Stealthburner display mount for the Big Tree Tech Knomi Display.
The Improvements in this version are:
There is a newer version available for the Knomi V2 here: Knomi V2 Display Mount for the Voron Stealthburner by boothyboothy | Download free STL model | Printables.com
Note:
There is now a V2_1 step file uploaded which includes a more robust clip to the display collar & a bridging support helper. The bridging detail on the Main Body as also been revised.
This mod IMHO provides much improved air flow (in comparison to the BTT stock design) to the PCF and a much more rigid mount for the display.
The display mount does protrude at the front of the SB by 5 mm, this therefore may effect the Y axis build volume in some cases where the SB is tight to the door panels.
Step files included with upload.
Short video here:
(1341) Kenny Mod2 for the BTT Knomi Stealthburner Display - YouTube
This is still installed on a test machine and not being used full time yet but the general cooling appears similar to the stock SB using Teaching Techs cooling fan torture test.
Very short video of a comparative water test here:
Original Version here:
Kenny Mod for the BTT Knomi Display by boothyboothy | Download free STL model | Printables.com
Update 02_06_23: Uploaded Install Guide 1_1
Update 13_08_23: Uploaded 2_1 which includes:
The author marked this model as their own original creation.