Pirate Spyglass

Ahoy!

Wanted to design a multicolor capable, collapsible Pirate Style spyglass.  

It is comprised of 5 parts:

1. Eyepiece Nut
2. Middle Nut
3. Outer Sleeve
4. Middle Sleeve
5. Inner Sleeve

Dimensions: 

• Outer Diameter: 57mm
• Closed Length: 100mm
• Open Length: 190mm
• Inner Diameter of viewport: 30mm

Print Settings:

• Designed for 0.4mm nozzle printed at 0.2mm layer height
• I used Silk PLA, use whatever
• I used Prusa Slicer Default settings for 0.2mm Quality
• No Supports required, All Files Orientated

If you want to print and manually change color out as seen in photos; I suggest Printing in minimum 3 steps:

1. Inner Sleeve, Middle Sleeve, Middle Nut. (Layer Height for color change is the same for the bottom rings.)
2. Eyepiece Nut. (will require 2 color changes)
3. Outer Sleeve. (will require 2 color changes)

Assembly Instructions:

Let me know how it works for you!  Please Leave a make and comment.