Display mount for Creality Ender-3 S1 Pro

Display mount for Creality Ender-3 S1 Pro with proper placement for Y-axis camera mount
12
106
1
671
updated June 1, 2023

Description

PDF

This is a mounting plate for Creality Ender-3 S1 Pro touchscreen display. It offsets display over a printer base plate to enable comfortable operation for the case when Creality camera is installed at right end of Y-axis bar using my or similar another model.

https://www.printables.com/model/418553-creality-camera-mount

The model can be considered as a remix of existing dispaly mount taken from Thingiverse.

https://www.thingiverse.com/thing:5676676

One of my first models was the camera mount. When started to use it i realized that at the lowest position of the head the camera becomes very close to the display making all the operations not convenient. You need to turn camera 180 degrees out of the table to access the display. The model from Thingiverse gave the final idea. I was not sure that original model will give the right placement for the display taking into account custom camera mount and 5015 part cooling fan duct (https://www.thingiverse.com/thing:5511666, https://k3d.tech/esp/) and decided to recreate it.

The new model rather simple as the original one. It does not require neither supports, nor bridges . You have to place it with the display plate down to the table. I printed it using PETG with 0.2layer (0.32layer was also fine for the test model) and 3x 0.4mm walls. Final version was made with 30%infill, but 20% on a test model was also fine.

I also added another feature for the remixed model - connecting points for a cage to hold Creality WIFI Box at right side of the display.

https://www.printables.com/model/496189-creality-wifi-box-mount

Feel free to leave any comments regarding your makes for this model.

Tags



Model origin

The author remixed this model.

Ender 3 S1 Pro Display offset bracket
by T23 (thingiverse.com)

License