This is a dog I modeled, based off a stuffed dog, and colored into parts for a multicolor print in three colors of your choice.
The slicing screenshot for the included 3mf is for 8 dogs/objects in an 8 hour 43 minute print whic optimizes the number of tool changes. That uses a .6 nozzle, .3 layer height, 2 perimeter, 15% infill, and has the models already painted with the above three extruders. You could use this with a .4 nozzle and it will print, faster, or transfer this to a .4 nozzle setup. The size shown is 41mm tall at 100% size. No supports are needed.
The author marked this model as their own original creation.