Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray.
- In the previous design, drips would be trapped in between the tray cover and the tray. Expanded drip tray area further back, so drips from the machine end up in the basin of the tray.
- The drip tray is a bit deeper to allow it to collect slightly more liquid.
- The front curve is adjusted to more precisely match the original drip tray.
- The back geometry is redesigned to better fit with the machine.
- Edges for the base, inner drip tray, and the top of the back are curved for ease of cleaning and better aesthetics.
Printing instructions
0.15mm resolution, infill 15% gyroid. Supports required for the back, not the main tray. I used “Support on build plate only” in PrusaSlicer and used paint-on supports to block supports from the tray base, since it's not necessary for the angles used there.
Tags
The author remixed this model.