I wanted to create a planter which can be printed in vase mode. Since I'm trusting the model to be waterproof, I designed a bottom which can be printed in normal mode and is then waterproof.
The Planter is designed with a wall thickness of 0,8mm. I used a 0,4mm nozzle and increased the wall thickness to 0,8mm. Worked well, a bit wobbly but stable. Printed the bottom with increased wall thickness so it is a solid model. Right now, no water passing through.
The planter is designed for 10cm saucer. In my case it suited well. Let me know your feedback.
Also let me know, if any other diameters are requested or if anything does'nt work.
The author marked this model as their own original creation.