Christmas tree star

This is a simple Chistmas star to be put on top of your Christmas tree. Optionally, this star can be equipped with a 5mm LED.

Print instructions

For a complete star, you need to print the model twice and glue the two parts together. This approach allows to print the star without any supportive structures.

If you are planning to equip the star with a 5 mm LED, which can be inserted into the cylindric hole in the middle, I'd recommend printing with a transparent filament.

The star shown in the photos has been printed with transparent PETG and a color change to a gloden filament at 20mm height.

Due to the resistance to glue PETG, I used a double sided tape to glue the two parts together.