Hex shaped woven basket with a twist

This is a woven basket model that I programmed in OpenSCAD. Since the rods, base, and weaves are separate STL files it is suitable for being a multi color print.

Print instructions

The resolution of the model in z is 0.2mm, so for best results the layer height should be a multiple of 0.2mm. If you want the full woven effect either print the rods and weaves in a separate color or have them sliced with different setting (or profiles in S3D), otherwise the slicer likely will merge the rods and weaves. The print shown was done on a railcore, with Proto-Pasta Matte Chestnut filament, sliced in PrusaSlicer at 0.2 layer height.