Barrel Pond

Included Parts:

• a bucket with a spout and a hole in the bottom for the pump hose
• a stand for the bucket to cover the pump.
• a diffuser for the pump output
• a basket that sits inside the bucket, for plants

Barrel and pump not included.

Printing:

• All the STL's are oriented correctly for printing.
• The Basket and the bucket need supports, the other parts do not
• Diffuser.stl is a multi-body file.  use  “Split to parts” then on the inner body, set Perimeters, Top and bottom layers, all to 0, and use 15% Gyroid infill.
• Basket.stl and Basket_Mesh_Front.stl are also multi-body files. Use 0 top and bottom layers. 1 perimeter, and 30% honeycomb infill on the inner parts of these models.